Preview

Unboxing Teenage Engineering’s gorgeous Computer-1 PC case

Teenage Engineering’s computer-1 is arguably the most refreshing PC case to come out in years, and makes everyone’s gaudy RGB towers look cheap.

Teenage Engineering computer-1 PC case review and unboxing
Evan Rodgers / Input

The current state of PC desktop design is horrendous. Almost everyone’s PC — gaming or not — looks like gaudy rainbow vomit.

Blame YouTubers or Twitch streamers or the infinite desk setup photos on Instagram that serve as inspiration for everyone’s aesthetic. Instead of using other peoples’ PC designs as a jumping-off point, everyone just copies — they buy the same minimalist NZXT towers and configure the RGBs accordingly. Look, me uWu!

The computer-1, designed by Teenage Engineering, shuns this RGB conformity. The mini-ITX PC case (you gotta supply all the PC parts yourself) is distinctly Teenage Engineering — Swedish, Bauhaus, and utilitarian.

Every corner, curve, perforation, and feels Dieter Rams-ian in its restraint.

Its compact aluminum chassis comes in flat-pack form, requiring you to bend the metal sheets into shape; the Computer-1 reminds me of Ikea’s Helmer drawer unit, including the handles for transport. It looks and feels mechanical, engineered, and showy (but not too much). The bright powder RAL 2004 orange (aka “pure orange”) paint job is visually tantalizing, and a much-needed breath of fresh air from the dystopian white, black, and silver PC cases under everyone’s desks. Every corner, curve, perforation, and feels Dieter Rams-ian in its restraint.

The computer-1 is also expensive ($195) — and sold out. We were lucky enough to grab one before it sold out within the first 20 minutes. Clearly, there’s pent-up demand for a PC case that’s actually beautiful.

By the time you read this, we’ll be knee-deep bending and transforming this mini-ITX case into the most powerful gaming PC its dimensions — and our wallets and the supply chain of available components — will allow us to piece together. (We’ll have a separate guide on the PC build process soon with all the PC parts we went with.) So this isn’t a review of the computer-1’s functionality as a ray-tracing-capable gaming PC, as it is an unboxing and appreciation of pretty packaging — both the cardboard and the metal frame. It’s all so delightful.

Clean boxes

The computer-1 packaging is super minimalist.Evan Rodgers / Input
Just a simple box.Evan Rodgers / Input
Opening up the box, the main package is for the chassis sheet metal.Evan Rodgers / Input
The entire computer-1 PC case comes in three boxes.Evan Rodgers / Input

I was somewhat concerned when the computer-1 arrived. The packaging is so thin and so light I thought for sure something was missing. Nope — everything you need to build the computer-1 comes in a single minimalist package that contains three boxes inside.

Bits and bobs

A closer look at the smaller components including the handles, rubber feet, and bundled tools for assembling the computer-1.Evan Rodgers / Input

You won’t need a screwdriver. There’s a hex key included in the box (that’s the yellow thing in clear packaging in the above photo.)

Toggle power switch and included cables.Evan Rodgers / Input
Careful not to lose the screws. They’re tiny!Evan Rodgers / Input
Yeah.. that switch is glorious.Evan Rodgers / Input

The frame

Before assembling, you want to unpack everything. Evan Rodgers / Input

At first, I didn’t realize there was a small instruction manual stuffed into one of the boxes. Even if you miss it, you can download the computer-1 manual on Teenage Engineering’s website.

The Computer-1 assembly manual.Evan Rodgers / Input
Lil flat lay of everything you get in your computer-1 kit.Evan Rodgers / Input

The aluminum sheet metal is shockingly thin. The manual cautions users “think twice, bend once!” which suggests to us that the metal is fragile. Bend too much and you might break the pieces. So make sure you’ve read the instructions correctly and bend carefully. You might not get a do-over.

This aluminum sheet is actually quite thin — only a few millimeters.Evan Rodgers / Input

You can’t see it in these images, but there are some very minor dents in the metal panels, likely from bruising during shipment. Though the brown shipping box the computer-1 comes in is about five times as wide, it could have used more bubble wrap or packing paper to protect it during transport.

Evan Rodgers / Input
Evan Rodgers / Input
Evan Rodgers / Input
Evan Rodgers / Input

Gaming PC?

This bad boy is about to get real.Teenage Engineering

The computer-1’s mini-ITX form factor limits the amount of raw power (read: GPU) that can be stuffed inside of its cramped insides. While Teenage Engineering didn’t design the computer-1 for gaming, we’re going to build a gaming PC out of it anyway. Because why not? A PC case with this kind of showstopping design deserves the very best it can handle (again, and what we can procure considering the ongoing supply chain issues and GPU price gouging).

Can the computer-1 handle the amount of performance we’re gonna throw at it? Or will it literally flame out? Teenage Engineering better have tested this thing, because we’re about to push it to its limits to find out if mini-ITX was the way to go or maybe it should have gone bigger with ATX.

The Teenage Engineering logo is subtly stamped on the front panel. Teenage Engineering
The case’s side panel features an opening for a cooling fan. Teenage Engineering
Your PSU, motherboard, and GPU should offer a nice contrast from the bright orange of the case. Teenage Engineering

Oh, and yes we bought the awesome 1:1 square computer monitor (1,920 x 1,920) that Teenage Engineering uses in its product photos to match the computer-1. We had to. It wasn’t cheap.